OVERVIEW
PTM-120B is an upgrade product designed for the increasing production requirement of chip encapsulation & testing factories and smart card manufacturers. The brand-new design enables operators to switch chips production between 6PIN and 8PIN within 60 seconds.
 
It integrates short-circuit punching, open and short test, chip initialization & pre-personalization as well as reject chip punching and marking. Modular design can meet your different production requirements and maximize decreasing your investment cost.
 
PTM-120B can be applied to contact/contactless and dual interface chip initialization, and also can be customized according to the demands for various chip production.

ADVANTAGES
•  Unique Patented Technology
It only takes 60s to switch production tasks between 6PIN and 8PIN contact chip.

•  High-performance Reader
The top Chinese industrial-class reader developed with open/short test function is stable and high cost-effective.

•  120Heads Ensure High Throughput
Max. throughput 99,000UPH for 6PIN chip;
Max. throughput 71,000UPH for 8PIN chip.

•  Modular Design
Each module can work independently or be combined on demand.

•  Unrestricted Workplace
Free of production site due to electric driving design without external air supply.

CONFIGURATIONS

•  Unwinding Module
It is convenient to adjust the position of driving tray and driven tray to meet the needs of different unwinding directions. It is compatible for the trays with 12.6MM and 38MM diameter of axle.

•  Initialization Module
It realizes fast switch between 6PIN and 8PIN chip production; 120 heads at most can be configured simultaneously; Contact/contactless and dual interface chip module initialization can be achieved; The module can be set up with a standalone style.

•  Re-Initialization Module
2 sets of contact heads or 3 sets of contactless heads are equipped for automatic re-initialization of failed chips, which can reduce the rejection rate.

•  Reject Chip Punching Module
Realizing reject chip punching and the punching positon is set up flexibly via software instead of manual adjustment, which greatly improve punching precision and production efficiency; The module can be set up with a standalone style.

•  Rewinding Module
Rewinding and packing the personalized tapes with guard band; The module can be set up with a standalone style.

•  Short-circuit Punching Module (Optional)
Realizing chips short-circuit disconnection; Module tapes with different specifications can be punched by quick replace of punching mould; The module can be set up with a standalone style.

APPLICATION SCOPE


OPTIONAL ACCESSORIES


THROUGHPUT
Throughput of Contact Chip (120 Heads)


SPECIFICATIONS

	Including short-circuit punching module	Excluding short-circuit punching module
Dimension	•   4750mm x 840mm x 1960mm	•   3800mm x 840mm x 1960mm
Weight	•   800kg	•   650kg
Power Supply	•   220V (-5% ~ +10%), 50Hz, 4KW	•   220V (-5% ~ +10%), 50Hz, 2KW
Maximum Throughput	•   60,000UPH	•   99,000UPH (6PIN)
Short-circuit Punching Throughput	•   Max. throughput 60,000UPH(14 chips/punch)
Noise	•   <50dB
Operation Temperature	•   23℃ ± 3℃
Operation Humidity	•   50 ± 10%
Chip Module Specification	•   M2 and M3
Communication Interface	•   Ethernet

General description:
 
The main function of the machine is to do the electrical testing or coding of chip modules in reel support.
 
The input to the machine is the un-encoded reel of modules.
 
The output of the machine is the tested or encoded reel of modules.
 
The machine must have the capacity to null the bad modules marking them with a hole. Also must have the capacity for changing the position of the hole.
 
The testing-coding should be done with multiple head units, in order to increase speed doing the testing-coding in parallel.
 
Possibility to change coding heads from 6 contacts modules to 8 contacts modules in an easy way.
 
Preferable an open system that allows including our own software, (machine with only coding heads, or with coding heads and readers).
 
Supplied with drivers for adapting our testing-coding software to the machine.
 
Very useful if the machine allows also the function of moving the module tapes from one to another reel (no coding, only for changing the direction sense of the tape at higher speed).
 
Also very useful if the machine can run also as a module counter, (counting of good modules and rejected modules reading the mark holes, not doing any electrical test).

    

   

               


South America Customers having a training and FAT  ( Factory Acceptance Test)

     

•  Based on PIOTEC’s pin-board switch patent, 6pin and 8pin production tasks can be easily switched just within 60s;
 
•  Modular design makes PTM-120B more flexible to be combined on demand;
 
•  Production site is unlimited due to electric driving design with no need for external air supply;
 
•  Adopting the top domestic industrial-class reader developed by PIOTEC with open and short test function. 

Services before Sales

• Reply your inquiry within 24 hours.
• Communication by email.
• Welcome you visiting our factory and final users in China.
• Help for VISA application and Invitation Letter issuing.
• We afford you consultation for 24 hours of 7 days in the process of sale and after service by phone or mail. We will support you for advisory opinion in purchasing, explanation in various technical problems and reliable supply in technique support.

Services on Purchasing

• Communication by email.
• Welcome you visiting our factory and final users in China.
• Help for VISA application and Invitation Letter issuing.

Services after Sales

• Online Support, 24 hours feedback once got the email
• Enough Spare Parts Preparation for you…
• Engineer to customer’s site for training & repairment
• Our equipments have 12 months for quality guarantee after sale. If the equipments do not work because of self cause, we will do free service and change the damaged spare parts.
• We will do life-long maintenance for all of our sold equipments. After quality guarantee period, if you can not maintain the equipments by self, we are under an obligation to go to work place and assist you to make maintenance. The cost of spare parts as well as expenses of traveling and man-hour of worker will be negotiated separately. Spare parts will be supported whether during guarantee period or not.
• After have finished maintenance, our service engineer will do training for the operators in plenty of time so that operators can be ensured to independently make operation, debugging and daily plant maintenance.

      Warranty of machine is 1 year excluding artificial damage.
      Warranty of consumable product is be defined according to the difference of product properties, our sales representative will state it clearly before you purchase.